With your vehicle protected with Diamondbrite's Advanced Ceramic protection, keeping the paintwork clean can be carried out with a few simple steps.
Lift off can be used as a pre-wash to remove any stubborn contaminants from the surface of the paintwork, such as bird droppings, brake dust and traffic film before commencing the wash with shampoo.
Spray the product over the areas you wish to clean, leave on for a minute or two and then wipe clean with a microfibre cloth or rinse with water.
Measure a capful or two of the Diamondbrite Ceramic Shampoo into a bucket and fill with warm water. Wash the mix over the whole vehicle with our Wiggly Wash Mitt to remove the dirt, then rinse with clean water and dry with our microfibre drying towel.
Alternatively Ceramic Blast Snow Foam can be used. Dilute the product in a ratio of 5 parts water to 1 part product and spray it over the vehicle with a foaming lance. Contact wash like normal.
Once it has been rinsed off with water, the Ceramic Shampoo and Ceramic Blast will leave a ceramic film over the surface of the paintwork that will help enhance the Diamondbrite Paint Protection.
Ceramic Glaze can be used to give your vehicle an extra level of shine and environmental protection.
After the contact wash, spray the Ceramic Glaze onto the paintwork and then buff with a microfibre cloth. Ceramic Glaze will last for around 2 months before reapplication is required. Paintwork coated with Ceramic Glaze can be washed as usual.
Alternatively, Ceramic Blast snow foam can be used to top-up your ceramic protection in an easier way, however the results will be less thorough.
As standard with every exterior Diamondbrite treatment, the interior seats, carpets and boot lining will be covered with the Diamondbrite Fabric Protector. Everyday marks from liquids such as food and drink spillages can usually be removed easily with a damp cloth, or for more stubborn marks with the Diamondbrite Upholstery Cleaner, or the Leather Feed and Cleaner for leather interiors. Please see the below guide for further details.
As standard with every exterior Diamondbrite treatment, the interior seats, carpets and boot lining will be covered with the Diamondbrite Fabric Protector.
Everyday marks from liquids such as food and drink spillages can usually be removed easily with a damp cloth, or for more stubborn marks with the Diamondbrite Upholstery Cleaner. If liquid is dropped on the fabric and soaks in, this does not mean the product has failed as you should be able to clean the area affected without leaving a stain – the density of the weave of the fabric will determine how easily water may seep through, however the individual fibres of the fabric will be protected against stains if treated with Diamondbrite Fabric Protector.
For suede or alcantara use Diamondbrite Upholstery Cleaner. For real or faux leather, use Leather Feed and Cleaner. See below for further details.
With the Leather Feed and Cleaner, marks can be easily wiped off. Pour a small amount of the product into a microfibre cloth and rub it into the affected area, and then wipe off. Leather Feed and Cleaner will also help keep your leather surfaces supple and less prone to cracking in the future, we recommend using it on a semi-regular basis to keep the leather in the best condition.
During the Diamondbrite Fabric Protection process each fibre is coated with an invisible resin based material. After treatment your fabric will be guaranteed against normal everyday spills and stains.
